TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 423 of 1320

Malfunction

Test or Inspection

Corrective Action

TM 9-2320-304-14&P

4-45

Organizational Maintenance Instructions (Cont)

Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)

LOAD HANDLING SYSTEM (LHS) (CONT)

3. LHS OVER LOAD INDICATOR DOES NOT OPERATE (CONT).

WARNING

•

Keep clear of equipment when equipment is being raised or lowered. Equipment

may fall and cause serious injury or death to personnel.

•

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact

positive electrical circuits, a direct short may result. Damage to equipment and

injury or death to personnel may occur.

Step 9.

Check for continuity on wire 1435 at LHS OVER LOAD indicator connector and chassis

ground.

If there is no continuity, repair wire 1435 or notify DS Maintenance.

Step 10.

Check LHS OVER LOAD indicator operation.

If LHS OVER LOAD indicator does not operate, fault not corrected. Notify DS

Maintenance.