TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 424 of 1320

Malfunction

Test or Inspection

Corrective Action

TM 9-2320-304-14&P

4-46

Organizational Maintenance Instructions (Cont)

4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).

Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)

LOAD HANDLING SYSTEM (LHS) (CONT)

4. LHS OVER LOAD INDICATOR DOES NOT GO OUT.

NOTE

Only remove center screw on engine side of LHS control box cover.

Step 1.

Remove harness connector and check for continuity at overload differential pressure

switch.

If there is no continuity, switch is OK. Replace LHS distribution box (

Para 4-34

).

If there is continuity, overload differential pressure switch is faulty. Notify DS

Maintenance.