TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 663 of 1320

TM 9-2320-304-14&P
4-227
Organizational Maintenance Instructions (Cont)
(6)
Position screw (13), washer (14),
and locknut (15) in fender support
arm (1) and fender brace (16).
(7)
Install two screws (17) and
locknuts (18) in fender support
arm (1).
(8)
Tighten locknut (15) on screw (13).
(9)
Install self-tapping screw (19) in
fender support arm (1).
NOTE
Push clips are properly installed when
lock button is pushed in after
installation.
(10)
Install marker lamp wiring
harness (20) and six push clips
(21) on fender support arm (1).
(11)
Install reflector bracket (22),
reflector (23), and two screws (24).
c. Follow-on Maintenance.
(1)
Install rear fender side marker lamp (Para 4-42).
(2)
Install center mud flap (Para 4-51).
(3)
Connect batteries (TM 9-2320-279-20).
(4)
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK


Back to Top