TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 740 of 1320

TM 9-2320-304-14&P

4-234.68

Organizational Maintenance Instructions (Cont)

4-53.13 CONTAINER HANDLING UNIT (CHU) BUMPER REPLACEMENT (CONT).

b. Installation.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If adhesive solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

NOTE

Left and right bumpers are identical.

Right bumper is shown.

(1)

Apply sealing compound to two

screws (1) and locknuts (2).

(2)

Install bumper (3) on bumper

weldment (4) with screws (1),

washers (5), and locknuts (2).

d.

Follow-on Maintenance.

Remove wheel chocks (TM 9-2320-364-10).

END OF TASK

Change 1