TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 731 of 1320

TM 9-2320-304-14&P

4-234.59

Organizational Maintenance Instructions (Cont)

b. Installation.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

(1)

Apply sealing compound to threads of

screw (1).

(2)

Install screw (1) and axle stop (2) on

rear guide (3).

WARNING

Rear guide assembly weighs 70 lbs. (32 kg).

Attach suitable lifting device to prevent

possible injury to personnel.

(3)

Attach lifting device to rear guide (3).

(4)

Soldier A and Soldier B position rear

guide (3) on frame (4) with two

lockwashers (5) and screws (6).

(5)

Install screw (7), washer (8), and

locknut (9) on rear guide (3).

(6)

Soldier A and Soldier B position four

locknuts (10) and screws (11) on rear

guide (3).

(7)

Soldier A and Soldier B tighten two

screws (6) on rear guide (3).

(8)

Soldier A and Soldier B tighten four

locknuts (10) on rear guide (3).

(9)

Remove lifting device from rear

guide (3).

c. Follow-on Maintenance.

Remove wheel chocks (TM 9-2320-279-10).

END OF TASK

Change 1