TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 723 of 1320

TM 9-2320-304-14&P
4-234.51
Organizational Maintenance Instructions (Cont)
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(9)
Apply sealing compound to threads of 12
screws (11), (12), and (13).
(10)
Install two short wear pads (14) to front
lift adapter (9) with four screws (13).
(11)
Install two short wear pads (15) to front
lift adapter (9) with four screws (12).
(12)
Install two long wear pads (16) to front
lift adapter (9) with four screws (11).
NOTE
There are two container locks and half
height container hooks. Both are installed
the same way. Right side is shown.
(13)
Install pin (17) and lock pin (18) with
wire rope (19) and swaging sleeves (20)
on half height container hook (21).
(14)
Install half height container hook (21)
on front lift adapter stow bracket (22)
with pin (17) and lock pin (18).
(15)
Install pin (23) and lock pin (24) with
wire rope (25) and swaging sleeves (26)
on container lock (27).
(16)
Install container lock (27) on front lift
adapter stow bracket (22) with pin (23)
and lock pin (24).
Change 1


Back to Top