TM-9-2320-304-14-P
LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2000
TM-9-2320-304-14-P - Page 75 of 1320
TM 9-2320-304-14&P
2-15
Operating Instructions (Cont)
NOTE
•
To fully view lift hook relation to hook bar, it may be necessary to observe position
from outside the cab.
•
LHS will only operate when transmission range selector is in N (Neutral).
(7)
Continue to unload until lift hook (8) has moved to below level of flatrack hook bar (2).
(8)
Release joystick (7).
(9)
Set the transmission range selector (1) to R (Reverse) and back truck up to flatrack, alining
truck and flatrack as straight as possible with lift hook (8) to middle of hook bar (2) until lift
hook (8) contacts hook bar (2). Be sure lift hook tip is positioned below bottom of hook bar (2).
NOTE
LHS will only operate when transmission range selector is in N (Neutral).
(10)
Set the transmission range selector (1) to N (Neutral).
CAUTION
Do not use R (Reverse) to back up truck while hook arm is attached to flatrack or damage to
LHS will occur.
(11)
Move the joystick (7) to LOAD position to raise lift hook (8) and engage hook bar (2).
Change 2
Back to Top
