TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 848 of 1320

TM 9-2320-304-14&P

5-98

Direct Support and General Support Maintenance (Cont)

5-21. LOAD HANDLING SYSTEM (LHS) RUBBER BUMPER REPLACEMENT (CONT).

b. Installation.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

NOTE

Compression frame rubber bumpers

shown. Installation procedure is the same

for all rubber bumpers.

(1)

Coat threads of rubber bumpers (1) with

sealing compound.

(2)

Install rubber bumpers (1) in

compression frame (2).

(3)

Install locknut (3) on rubber

bumpers (1).

c. Follow-on Maintenance.

Remove wheel chocks (TM 9-2320-279-10).

END OF TASK