TM-9-2320-304-14-P
LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2000
TM-9-2320-304-14-P - Page 85 of 1320
TM 9-2320-304-14&P
2-25
Operating Instructions (Cont)
CAUTION
Never drive with LHS NO TRANSIT indicator illuminated. An illuminated indicator means
load locks are not engaged and LHS is not fully stowed.
NOTE
Hook arm does not need to be fully stowed if more transfer operations are going to be made.
(16)
Move joystick (6) to LOAD position until LHS is in transit position. LHS NO TRANSIT
indicator (7) will go out indicating LHS is in transport position.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(17)
Release joystick (6).
(18)
Turn hydraulic selector switch (5) to OFF position.
(19)
Put PTO ENGAGE switch (3) in OFF position. Make sure indicator light (4) goes off.
Change 2
Back to Top
