TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 864 of 1320

TM 9-2320-304-14&P

5-112

Direct Support and General Support Maintenance (Cont)

5-24. LOAD HANDLING SYSTEM (LHS) MAIN FRAME REPAIR (CONT).

(4)

Remove four locknuts (5), lockwashers (6), and bulkhead fittings (7) from main frame (2).

Discard locknuts.

c. Cleaning/Inspection.

WARNING

•

Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles,

face shield, and gloves; use only in a well-ventilated area; avoid contact with skin,

eyes, and clothes; and do not breathe vapors. Keep away from heat or flame. Never

smoke when using solvent. The flashpoint for Type III Drycleaning Solvent is 200

_

F

(93

_

C). Failure to do so may result in injury or death to personnel.

•

If personnel become dizzy while using cleaning solvent, immediately get fresh air

and medical help. If solvent contacts skin or clothes, flush with cold water. If

solvent contacts eyes, immediately flush eyes with water and get immediate medical

attention.

(1)

Clean all metal surfaces with drycleaning solvent (P-D-680).

(2)

Inspect main frame for cracked welds or damage. Replace or repair as necessary.

(3)

Inspect bushing for wear. Replace if pivot pin has worn through bushing surface and metal is

showing through.