TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1011 of 1318

TM 9-2320-328-13&P-1

0089-23

DRAFT

0089

Change 1

.

HWT0777

.

Step 35.

Turn Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Disconnect cab instrument panel wire harness cab power

distribution wire harness connector.

With a test lead set, check for continuity between

cab power distribution wire harness wire 1592 (gray) at cab power distribution wire

harness cab instrument panel wire harness connector, terminal 10 and a known good

ground.

.

a.

If there is continuity, repair wire 1592 in cab instrument panel wire

harness if repairable (TM 9-2320-325-14&P), or replace cab instrument

panel wire harness (WP 0279).

.

b.

If there is no continuity, repair wire 1592 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION