TM 9-2320-328-13&P-1
0089-14
DRAFT
0089
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3233
.
Step 22.
Remove passenger side light bezel cover (WP 0335).
Disconnect passenger side body
wire harness 12-pin connector. With a test lead set, check for continuity across
passenger side body wire harness wire 1609 (gray) from passenger side body wire
harness 12-pin connector, terminals 7 to non-operating passenger side stowage hatch
door switch.
.
a.
If there is continuity, repair wire 1609 in lower passenger side body wire
harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0298).
.
b.
If there is no continuity, repair wire 1609 in upper passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace
passenger side body wire harness (WP 0298).
.
Step 23.
While an assistant opens and closes each of following stowage compartment doors one
at a time (WP 0008), check if CHECK FOR OPEN COMPARTMENT DOOR WHEN
LIGHT IS ON indicator flashes when door is open (WP 0004).
Open passenger side
rear T1 hatch (WP 0008), then close. Open passenger side forward T2
hatch (WP 0008), then close.
.
If CHECK FOR OPEN COMPARTMENT DOOR WHEN LIGHT IS ON
indicator does not flash when stowage compartment door is open, go to
Step 26.
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION