TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 995 of 1318

TM 9-2320-328-13&P-1

0089-7

DRAFT

0089

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3226

.

Step 12.

Remove driver side rear light bezel cover (WP 0335).

Disconnect driver side body wire

harness 4-pin connector.

Disconnect driver side stowage hatch T3 door switch.

With a

test lead set, check for continuity across driver side body wire harness wire 1609 (gray)

from driver side body wire harness 4-pin connector, terminal 1 to driver side stowage

hatch T3 door switch connector terminal.

.

a.

If there is continuity at both terminals, repair wire 1609 in lower driver

side body wire harness if repairable (TM 9-2320-325-14&P), or replace

driver side body wire harness (WP 0286).

.

b.

If there is no continuity, repair wire 1609 in upper driver side body wire

wire harness if repairable (TM 9-2320-325-14&P), or replace driver

side body wire harness (WP 0286).

.

Step 13.

While an assistant opens and closes driver side stowage hatch T3 (WP 0008), check if

CHECK FOR OPEN COMPARTMENT DOOR WHEN LIGHT IS ON indicator flashes

when door is open (WP 0004).

.

If CHECK FOR OPEN COMPARTMENT DOOR WHEN LIGHT IS ON

indicator does not flash when driver side stowage hatch T3 is open, go to

Step 16.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION