TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1013 of 1390

TM 9-2320-328-13&P-2

0279-1

DRAFT

0279

FIELD LEVEL MAINTENANCE

CAB INSTRUMENT PANEL WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of cab power distribution wire harness to ensure correct installation.

•

Note position and remove cable ties and cushion clips as required.

•

Refer to schematic for wire locations.

1.

Disconnect cab instrument panel wire harness connector (1) from upper rear warning flasher unit (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1996

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (2)

References

TM 9-2320-325-14&P

WP 0391, Fig. 51

Equipment Conditions

Cab instrument panel assembly

removed (WP 0204)

Blackout relays removed (WP 0240)