TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1029 of 1390

TM 9-2320-328-13&P-2

0280-1

DRAFT

0280

FIELD LEVEL MAINTENANCE

CAB POWER DISTRIBUTION WIRE HARNESS AND BLOCK REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of cab power distribution wire harness prior to removal to ensure proper

installation.

•

Note position and remove cable ties, split loom, and cushion clips as required.

1.

Remove nut (1), lockwasher (2), and seven wires 1138 (3) from cab 24 VDC terminal block (4).

Discard

lockwasher.

2.

Remove nut (5), lockwasher (6), and five wires 1640 (7) from cab ground terminal block (8).

Discard

lockwasher.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2816

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (1)

Lockwasher (1)

Lockwasher (1)

Locknut (3)

References

TM 9-2320-325-14&P

WP 0391, Fig. 50

Equipment Conditions

Cab instrument panel assembly

removed (WP 0204)

Cab power distribution block circuit breakers

removed (WP 0242)

Cab power distribution block diode

removed (WP 0243)

Cab power distribution block relays

removed (WP 0244)