TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1034 of 1390

TM 9-2320-328-13&P-2

0280-6

DRAFT

0280

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

11. Remove three locknuts (31), cushion clips (32), cab power distribution wire harness block (33), and three

screws (34) from cab instrument panel assembly (35).

Discard locknuts.

END OF TASK

INSTALLATION

NOTE

•

Route cab power distribution wire harness as noted prior to removal.

•

Install cable ties, split loom, and cushion clips as required.

1.

Install cab power distribution wire harness block (33), on cab instrument panel assembly (35) with three

screws (34), cushion clips (32), and locknuts (31).

HWT2818