TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1041 of 1390

TM 9-2320-328-13&P-2

0281-1

DRAFT

0281

FIELD LEVEL MAINTENANCE

CAB PUMP CONTROL WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of cab pump control wire harness prior to removal to ensure proper

installation.

•

Note position and remove cable ties, split loom, and cushion clips as required.

1.

Remove nut (1), lockwasher (2), wire 1027 (3), wire 1640 (4), and wire 1023 (5) from cab ground terminal

block (6).

Discard lockwasher.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2824

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (1)

References

WP 0391, Fig. 57

Equipment Conditions

Cab instrument panel assembly removed

(WP 0204)