TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1190 of 1390

TM 9-2320-328-13&P-2

0302-12

DRAFT

0302

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

43. Disconnect pump house wire harness pressure governor transorb module connector (108) from transorb

module (109).

NOTE

Perform Step (43) if transorb module needs to be removed.

44. Remove two locknuts (110), screws (111), and transorb module (109) from shield (112).

Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

45. Disconnect pump house wire harness connector (113) from hydraulic oil level sensor connector (114).

46. Disconnect pump house wire harness connector (115) from hydraulic oil temperature sensor connector (116).

HWT3061

HWT2251A