TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1185 of 1390

TM 9-2320-328-13&P-2

0302-7

DRAFT

0302

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

22. Remove locknut (55) and wire 2774 (56) from primer pump solenoid (57).

Discard locknut.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

To locate correct datalink cable, follow yellow and green banded datalink cables from

pressure governor ECU service connector to first Y connector in series.

23. Disconnect pump house wire harness connector (58) from pressure governor control ECU datalink Y

connector (59).

24. Disconnect pump house wire harness connector (60) from chassis datalink Y connector (61).

25. Remove four locknuts (62), lockwashers (63), washers (64), pressure governor ECU service connector (65),

and four screws (66) from bracket (67).

Discard locknuts and lockwashers.

HWT2243

HWT2244