TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1177 of 1390

TM 9-2320-328-13&P-2

0301-1

DRAFT

0301

FIELD LEVEL MAINTENANCE

PUMP HOUSE B+ STUD REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Remove nut (1), washer (2), and five wires (3) from B+ stud (4).

2.

Remove locknut (5) and anchor clip (6) from screw (7).

Discard locknut.

3.

Remove two locknuts (8), screws (7) and (9), and B+ stud (4) from bracket (10).

Discard locknuts.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2060

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Locknut (1)

Locknut (2)

References

WP 0391, Fig. 14

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)

Pump house compartment door P opened

(WP 0008)