TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1168 of 1390

TM 9-2320-328-13&P-2

0298-20

DRAFT

0298

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

24. Route upper passenger side body wire harness (5) from top front passenger side stowage compartment (6)

and connect foam level probe adapter (4) on upper passenger side body wire harness connector (3).

25. Connect water level probe adapter (2) on upper passenger side body wire harness connector (1).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install foam/water tank level probe cover for upper passenger side body wire harness (WP 0189)

2.

Install light bezel cover (passenger side) (WP 0335)

3.

Install passenger side top stowage compartment doors for upper passenger side body wire

harness (WP 0008)

4.

Install stowage compartment (lower rear passenger side) for lower passenger side body wire

harness (WP 0357)

END OF TASK

END OF WORK PACKAGE

HWT3399

..

..

..

..

..

..

..

..

..

..

..

NOTE

Both water level probe adapter and foam level probe adapter must be covered with heat

shrink tubing before connecting to upper passenger side body wire harness

(TM 9-2320-325-14&P).