TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1172 of 1390

TM 9-2320-328-13&P-2

0299-4

DRAFT

0299

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.

Remove four screws (20) and plate (21) from pump house power distribution box (17).

9.

Remove three screws (22), washers (23), and pump house power distribution wire harness block (24) from

plate (21).

NOTE

Note position of circuit breakers and relays prior to removal to ensure proper installation.

10. Remove 13 circuit breakers (25) and five relays (26), from pump house power distribution wire harness

block (24).

END OF TASK

INSTALLATION

NOTE

•

Install circuit breakers and relays in same position as noted prior to removal.

•

Install cable ties as required.

1.

Install five relays (26) and 13 circuit breakers (25) on pump house power distribution wire harness block (24).

2.

Install pump house power distribution wire harness block (24) on plate (21) with three washers (23) and

screws (22).

3.

Install plate (21) on pump house power distribution box (17) with four screws (20).

HWT2829