TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1179 of 1390

TM 9-2320-328-13&P-2

0302-1

DRAFT

0302

FIELD LEVEL MAINTENANCE

PUMP HOUSE WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of pump house wire harness prior to removal to ensure proper installation.

•

Note position and remove cable ties, split loom, and cushion clips as required.

1.

Disconnect pump house wire harness connector (1) from discharge pressure transducer connector (2).

2.

Disconnect pump house wire harness connector (3) from intake pressure transducer connector (4).

3.

Disconnect pump house wire harness (5) from intake vacuum transducer connector (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2232

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (1)

Lockwasher (1)

Locknut (1)

Locknut (4)

Lockwasher (4)

References

TM 9-2320-325-14&P

WP 0391, Fig. 18, 55

Equipment Conditions

Pump house panel A, E, G, H, and K

removed (WP 0339)

Reel rewind switch removed (WP 0253)

Hose reel removed (WP 0247)