TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 536 of 1390

TM 9-2320-328-13&P-2

0175-2

DRAFT

0175

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Step (4) if adapter needs to be removed.

4.

Disconnect adapter connector (7) from passenger side body wire harness connector (8).

END OF TASK

INSTALLATION

NOTE

•

Perform Step (1) if adapter was removed.

•

Install cable ties as required.

•

Both ends of adapter connector must be covered with heat shrink tubing before

connecting adapter connector to passenger side body wire harness connector and foam

level probe (TM 9-2320-325-14&P).

1.

Connect passenger side body wire harness connector (8) on adapter connector (7).

2.

Install gasket (5) and foam level probe (4) on tank (6) with five screws (3).

3.

Connect adapter connector (2) on foam level probe connector (1).

FOLLOW-ON MAINTENANCE

Install foam/water tank level probe cover (WP 0189)

END OF TASK

END OF WORK PACKAGE

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3401