TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 778 of 1390

TM 9-2320-328-13&P-2

0225-2

DRAFT

0225

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove two screws (7), lockwashers (8), and washers (9) from cab side lightbar (3). Discard lockwashers.

6.

Remove two nuts (10), lockwashers (11), four washers (12), two screws (13), and cab side lightbar (3) from

cab (14).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

Both cab side lightbars are installed the same way.

Driver side shown.

1.

Install cab side lightbar (3) on cab (14) with two screws (13), four washers (12), two lockwashers (11), and

nuts (10).

2.

Install two washers (9), lockwashers (8), and screws (7) on cab side lightbar (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1270