TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 769 of 1390

TM 9-2320-328-13&P-2

0224-1

DRAFT

0224

FIELD LEVEL MAINTENANCE

CAB FRONT LIGHTBAR REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Perform Steps (1) and (2) if removing cab front lightbar lights.

•

All cab front lightbar lights are removed the same.

Passenger side lights shown.

1.

Remove four screws (1) and cab front lightbar light (2) from cab front lightbar (3).

2.

Disconnect cab front lightbar wire harness connector (4) from cab front lightbar light (2).

NOTE

•

Perform Steps (3) through (10) if removing cab front lightbar.

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

3.

Disconnect cab front lightbar cable connector (5) from cab lightbar cable assembly branch connector (6).

4.

Disconnect cab front lightbar cable connector (7) from cab roof wire harness connector (8).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0233

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (1)

Lockwasher (1)

Lockwasher (1)

Lockwasher (2)

Lockwasher (1)

Lockwasher (1)

References

WP 0391, Fig. 27

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

Equipment Conditions

Cab clearance lights and brackets removed

(WP 0223)