TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 761 of 1390

TM 9-2320-328-13&P-2

0221-1

DRAFT

0221

FIELD LEVEL MAINTENANCE

PUMP OPERATOR'S PANEL TOGGLE SWITCH (THREE-POSITION) REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

1.

Remove three screws (1), lockwashers (2), wire 2316 (3), wire 2314 (4), and wire 2315 (5) from three-position

toggle switch (6).

Discard lockwashers.

NOTE

Note position of three-position toggle switch prior to removal to ensure proper installation.

2.

Remove nut (7), washer (8), and three-position toggle switch (6) from pump operator’s panel (9).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0011

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Compound, Sealing (WP 0400, Item 10)

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Materials/Parts (continued)

Lockwasher (3)

References

WP 0391, Fig. 34

Equipment Conditions

Pump operator’s panel opened (WP 0207)