TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 758 of 1390

TM 9-2320-328-13&P-2

0219-2

DRAFT

0219

INSTALLATION

NOTE

Adjusting nut comes with switch.

1.

Adjust nut (7) on driver main inlet primer button (4).

2.

Install driver main inlet primer button (4) on pump operator’s panel (6) with cover (5).

3.

Install wire 1590 (3) and wire 2773 (2) on driver main inlet primer button (4) with two screws (1).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

4.

Apply sealing compound on two screws (1), wire 2773 (2), and wire 1590 (3).

END OF TASK

FOLLOW-ON MAINTENANCE

Close pump operator’s panel (WP 0207)

END OF TASK

END OF WORK PACKAGE

HWT0241

WARNING

ICON 30, 44, 27