TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 755 of 1390

TM 9-2320-328-13&P-2

0218-3

DRAFT

0218

INSTALLATION

NOTE

Perform Steps (1) and (2) for indicator installation.

1.

Install indicator (14) on cover plate (2) with lockwasher (13) and nut (12).

2.

Repair wire 3895 (11) and wire 1405 (10) (TM 9-2320-325-14&P).

NOTE

Perform Steps (3) through (5) for overheat test button installation.

3.

Install overheat test button (8) on cover plate (2) with nut (9).

4.

Install wire 4085 (7) and wire 1405 (6) on overheat test button (8) with two washers (5) and screws (4).

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

5.

Apply sealing compound to ends of wire 4085 (7) and wire 1405 (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 30, 44, 27