TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 759 of 1390

TM 9-2320-328-13&P-2
0220-1
DRAFT
0220
FIELD LEVEL MAINTENANCE
PUMP OPERATOR'S PANEL TOGGLE SWITCH (TWO-POSITION) REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
All two-position toggle switches are removed the same way.
WATER TANK DRAIN
two-position toggle switch shown.
Note position of two-position toggle switch prior to removal to ensure proper installation.
Tag and mark wires prior to removal to ensure proper installation.
1.
Remove two screws (1), wire 2834 (2), and wire 4053 (3) from two-position toggle switch (4).
2.
Remove nut (5), washer (6), and two-position toggle switch (4) from pump panel (7).
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HWT0252
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0398, Item 17)
Materials/Parts
Tags, Identification (WP 0400, Item 23)
Compound, Sealing (WP 0400, Item 10)
References
WP 0391, Fig. 34
Equipment Conditions
Pump operator’s panel opened (WP 0207)


Back to Top