TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 749 of 1390

TM 9-2320-328-13&P-2

0217-3

DRAFT

0217

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Perform Steps (5) through (7) for high idle engage indicator replacement.

5.

Remove screw (12) and wire 1435 (13) from indicator (14).

6.

Remove screw (15) and jumperwire (6) from indicator (14).

7.

Remove nut (16), washer (17), and indicator (14) from panel (2).

END OF TASK

INSTALLATION

NOTE

Perform Steps (1) through (4) for high idle engage indicator installation.

1.

Install indicator (14) on panel (2) with washer (17) and nut (16).

2.

Install jumperwire (6) on indicator (14) with screw (15).

3.

Install wire 1435 (13) on indicator (14) with screw (12).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

4.

Apply sealing compound to thread of two screws (15) and (12).

HWT2059

WARNING

ICON 30, 44, 27