TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 740 of 1390

TM 9-2320-328-13&P-2

0215-2

DRAFT

0215

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Perform Step (3) if striplight bracket needs to be removed.

•

All striplight brackets are removed the same way.

Top driver side pump house bracket

shown.

•

Number of screws, washers, lockwashers, and nuts may vary.

3.

Remove four nuts (7), lockwashers (8), eight washers (9), four screws (10), and striplight bracket (11) from

pump house frame (12).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

•

Perform Step (1) if striplight bracket was removed.

•

All striplight brackets are installed the same way.

Top driver side pump house bracket

shown.

•

Number of screws, washers, lockwashers, and nuts may vary.

1.

Install striplight bracket (11) on pump house frame (12) with four screws (10), eight washers (9), four

lockwashers (8), and nuts (7).

HWT2360