TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 730 of 1390

TM 9-2320-328-13&P-2

0211-4

DRAFT

0211

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Swipe the magnet over CAL. five times to enter the calibration mode.

Five right display LEDs will flash on and

off.

4.

After three seconds swipe the magnet five more times to set the calibration into memory.

Five right display

LEDs go on.

5.

After six seconds the calibration process will terminate and all LEDs will go on to show that foam tank is full.

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Push battery disconnect to off position (WP 0007)

2.

Close pump operator’s panel cover (WP 0010)

END OF TASK

END OF WORK PACKAGE

HWT3450