TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 726 of 1390

TM 9-2320-328-13&P-2

0210-6

DRAFT

0210

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Electric valve controller is calibrated after display flashes 0.

•

After calibration, display may show number one.

8.

Push PRESSURE button (2) again, and 2Ero (ZERO) will blink two to three times and display will show 0.

9.

Repeat Steps (3) through (8) if display does not show 0 or 1.

10. Pull battery disconnect switch to off position (WP 0007).

END OF TASK

FOLLOW-ON MAINTENANCE

Close pump operator’s panel cover (WP 0010)

END OF TASK

END OF WORK PACKAGE

HWT3405