TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 717 of 1390

TM 9-2320-328-13&P-2

0209-1

DRAFT

0209

FIELD LEVEL MAINTENANCE

PUMP OPERATOR'S PANEL ELECTRIC VALVE CONTROL REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

All electrical valve controls are removed the same way.

Driver side auxiliary inlet shown.

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

1.

Disconnect pump operator’s panel wire harness connector (1) from electric valve control connector (2).

2.

Disconnect valve control wire harness connector (3) from electric valve control connector (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2015

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

WP 0391, Fig. 34

Equipment Conditions

Pump operator’s panel open (WP 0207)