TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 708 of 1390

TM 9-2320-328-13&P-2

0206-2

DRAFT

0206

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove nine locknuts (12), washers (13), screws (14), and hinge (6) from housing (15). Discard locknuts.

6.

Remove four locknuts (16), screws (17), and two rubber latches (18) from housing (15).

Discard locknuts.

END OF TASK

INSTALLATION

1.

Install two rubber latches (18) on housing (15) with four screws (17) and locknuts (16).

2.

Install hinge (6) on housing (15) with nine screws (14), washers (13), and locknuts (12).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2956