TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 702 of 1390

TM 9-2320-328-13&P-2
0205-28
DRAFT
0205
Change 1
CAB INSTRUMENT PANEL E REMOVAL
1.
Remove bumper turret control (1) from vehicle (WP 0375).
2.
Remove pressure governor control (2) from vehicle (WP 0197).
3.
Remove cab 1-2-3 signal indicator (3) from cab instrument panel E (4) (WP 0201).
4.
Remove cab 1-2-3 buzzer audio alarm (5) from cab instrument panel E (4) (WP 0203).
NOTE
To locate correct datalink cable, follow yellow and green banded datalink cables from cab
pressure governor control connector to first Y connector in series.
Tag and mark all wires prior to removal for proper installation.
Note routing of wires prior to removal for proper installation.
5.
Disconnect main wire harness connector (6) from pressure governor control ECU datalink Y connector (7).
6.
Disconnect main wire harness connector (8) from chassis datalink Y connector (9).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3486
HWT2571


Back to Top