TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 693 of 1390

TM 9-2320-328-13&P-2

0205-19

DRAFT

0205

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of cab power distribution wire harness to ensure correct installation.

•

Note position and remove cable ties and cushion clips as required.

3.

Remove CHECK FOR OPEN COMPARTMENT DOORS WHEN LIGHT IS ON indicator (6) from cab

instrument panel C (5) (WP 0195).

4.

Disconnect cab instrument panel wire harness connector (7) from PUMP PTO switch (8).

5.

Disconnect wire 1677 (9), wire 1640 (10) and jumperwire 2768 (11) from PUMP PTO ENGAGED indicator

light (12).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3480