TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 701 of 1390

TM 9-2320-328-13&P-2

0205-27

DRAFT

0205

Change 1

CAB INSTRUMENT PANEL D REMOVAL

NOTE

Cab instrument panel D fasteners are removed in Step (1).

1.

Remove GAS PARTICULATE FILTER UNIT switch (1) and GAS ALARM switch (2) from cab instrument

panel D (3) (TM 9-2320-325-14&P).

2.

Remove cab HIGH IDLE switch (4) and indicator (5) from cab instrument panel D (3) (WP 0217).

3.

Remove four screws (6) and data plate (7) from cab instrument panel D (3).

4.

Remove plug (8) from cab instrument panel D (3).

5.

Remove data plate (9) from cab instrument panel D (3).

6.

Remove cab instrument panel D (3) from vehicle.

END OF TASK

CAB INSTRUMENT PANEL D INSTALLATION

1.

Place cab instrument panel D (3) in stow position on vehicle.

2.

Install data plate (9) on cab instrument panel D (3).

3.

Install plug (8) on cab instrument panel D (3).

4.

Install data plate (7) on cab instrument panel D (3) with four screws (6).

5.

Install cab HIGH IDLE switch (4) and indicator (5) on cab instrument panel D (3) (WP 0217).

6.

Install GAS PARTICULATE FILTER UNIT switch (1) and GAS ALARM switch (2) on cab instrument

panel D (3) (TM 9-2320-325-14&P).

END OF TASK

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3485