TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 707 of 1390

TM 9-2320-328-13&P-2

0206-1

DRAFT

0206

FIELD LEVEL MAINTENANCE

PUMP OPERATOR'S PANEL COVER REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

An assistant may be required to help remove pump operator’s panel cover when removing

last screw.

1.

Remove nine locknuts (1), washers (2), screws (3), pump operator’s panel cover (4), and door stop (5) from

hinge (6).

Discard locknuts.

2.

Remove two locknuts (7), screws (8), and hooks (9) from pump operator’s panel cover (4).

Discard locknuts.

3.

Remove three data plates (10) from pump operator’s panel cover (4) (WP 0326).

4.

Remove door seal (11) from pump operator’s panel cover (4).

Discard door seal.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2955

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Locknut (9)

Locknut (2)

Door Seal (1)

Locknut (9)

Locknut (4)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0010

WP 0326

WP 0391, Fig. 82

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)

Pump operator’s panel cover opened (WP 0010)

Reflector removed (WP 0346)