TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 714 of 1390

TM 9-2320-328-13&P-2

0208-2

DRAFT

0208

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Remove two locknuts (1), screws (2), and pump operator’s panel (3) from two tethers (4) and vehicle.

Discard

locknuts.

NOTE

Perform Step (2) if teethers need to be removed.

2.

Remove two locknuts (5), screws (6), and tethers (4) from housing (7).

Discard locknuts.

END OF TASK

INSTALLATION

NOTE

Perform Step (1) if tethers were removed.

1.

Install two tethers (4) on housing (7) with two screws (6) and locknuts (5).

2.

Install two tethers (4) on pump operator’s panel (3) with two screws (2) and locknuts (1).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2946