TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 736 of 1390

TM 9-2320-328-13&P-2

0213-2

DRAFT

0213

INSTALLATION

NOTE

All indicators are installed the same way.

Foam flush indicator shown.

1.

Install indicator (4) on pump operator’s panel (7) with lockwasher (6) and nut (5).

2.

Install wire 2849 (3) and wire 3895 (2) on indicator (4) with two screws (1).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

3.

Apply sealing compound to ends of wire 2849 (3) and wire 3895 (2).

END OF TASK

FOLLOW-ON MAINTENANCE

Close pump operator’s panel (WP 0207)

END OF TASK

END OF WORK PACKAGE

HWT0264

WARNING

ICON 30, 44, 27