TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 760 of 1390

TM 9-2320-328-13&P-2

0220-2

DRAFT

0220

INSTALLATION

NOTE

All two-position toggle switches are installed the same way.

1.

Install two-position toggle switch (4) on pump panel (7) with washer (6) and nut (5).

2.

Install wire 4053 (3) and wire 2834 (2) on toggle switch (4) with two screws (1).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

3.

Apply sealing compound to ends of wire 4053 (3) and wire 2834 (2).

END OF TASK

FOLLOW-ON MAINTENANCE

Close pump operator’s panel (WP 0207)

END OF TASK

END OF WORK PACKAGE

HWT0252

WARNING

ICON 30, 44, 27