TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 766 of 1390

TM 9-2320-328-13&P-2

0223-2

DRAFT

0223

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Lamp must be replaced as indicated on lamp cover with TOP facing up.

Rotate lamp 90

degrees in order to remove lamp from mounting base.

2.

Remove lamp (4) from mounting base (3).

NOTE

•

Lamp will only function if correctly installed on rubber mounting of pigtail.

Plastic tabs on

lamp must align with openings on rubber mounting of pigtail.

It is possible to force lamp

on rubber mounting of pigtail in opposite position, which will not allow lamp to operate.

•

Note position of lamp on rubber mounting of pigtail prior to removal to ensure proper

installation.

3.

Remove lamp (4) from rubber mounting of pigtail (5).

4.

Remove two screws (6), washers (7), and bracket (8) from cab roof (9).

HWT3114