TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 762 of 1390
TM 9-2320-328-13&P-2
0221-2
DRAFT
0221
INSTALLATION
NOTE
•
Install three-position toggle switch as noted prior to removal.
•
Install cable ties as required.
1.
Install three-position toggle switch (6) on pump operator’s panel (9) with washer (8) and nut (7).
2.
Install wire 2315 (5), wire 2314 (4), and wire 2316 (3) on three-position toggle switch (6) with three
lockwashers (2) and screws (1).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
3.
Apply sealing compound to three screws (1), lockwashers (2), wire 2316 (3), wire 2314 (4), and wire 2315 (5).
END OF TASK
FOLLOW-ON MAINTENANCE
Close pump operator’s panel (WP 0207)
END OF TASK
END OF WORK PACKAGE
HWT0011
WARNING
ICON 30, 44, 27
Back to Top
