TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009
TM-9-2320-328-13-P-3

  TM-9-2320-328-13-P-3 - Page 24 of 844

TM 9-2320-328-13&P-3
0325-2
DRAFT
0325
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
•
Lamp will only function if correctly installed on rubber mounting of pigtail.
Plastic tabs on
lamp must align with openings on rubber mounting of pigtail.
It is possible to force lamp
on rubber mounting of pigtail in opposite position, which will not allow lamp to operate.
•
Note position of lamp on rubber mounting of pigtail and light cover prior to removal to
ensure proper installation.
•
Wire and rubber mounting of pigtail is routed through bracket after removal.
3.
Remove rubber mounting of pigtail (9) and wire (6) from lamp (10) and mounting base (3).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.
Remove four screws (11), lockwashers (12), washers (13), and upper step mounting bracket (14) from
vehicle.
Discard lockwashers.
HWT1966
HWT1967


Back to Top