TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 277 of 844

TM 9-2320-328-13&P-3

0365-1

DRAFT

0365

FIELD LEVEL MAINTENANCE

WHEEL CHOCKS STOWAGE COMPARTMENT REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

Both wheel chock stowage compartments are removed the same way.

Front stowage

compartment shown.

1.

Remove four screws (1), lockwashers (2), washers (3), and stowage compartment (4) from vehicle.

Discard

lockwashers.

2.

Remove cotter pin (5) and two washers (6) from rod (7).

Discard cotter pin.

NOTE

Note position of spring prior to removal to ensure proper installation.

3.

Remove rod (7) and spring (8) from stowage compartment (4).

4.

Remove spring (8) from rod (7).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1333

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Lockwasher (4)

Cotter Pin (1)

Locknut (2)

References

WP 0391, Fig. 81

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)