TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 284 of 844

TM 9-2320-328-13&P-3

0367-2

DRAFT

0367

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove hose (12) from elbow (13).

NOTE

Note position and direction of nozzle prior to removal to ensure proper installation.

4.

Remove nozzle (14) from swivel fitting (15).

5.

Remove swivel fitting (15) from bulkhead fitting (16).

6.

Remove elbow (13) from bulkhead fitting (16).

7.

Remove jam nut (17), lockwasher (18), and bulkhead fitting (16) from bracket (11).

Discard lockwasher.

INSTALLATION

1.

Install bulkhead fitting (16) on bracket (11) with lockwasher (18) and jam nut (17).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

2.

Apply sealing compound to threads of elbow (13).

3.

Install elbow (13) on bulkhead fitting (16).

4.

Install swivel fitting (15) on bulkhead fitting (16).

HWT1420

WARNING

ICON 30, 44, 27