TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 289 of 844

TM 9-2320-328-13&P-3

0369-1

DRAFT

0369

Change 1

FIELD LEVEL MAINTENANCE

WIRE ROPE REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

Perform Steps (1) through (5) to remove wire rope from driver side main inlet cap.

1.

Remove screw (1), lockwasher (2), washer (3), and clip (4) from panel (5).

Discard lockwasher.

2.

Remove S-hook (6) and wire rope (7) from cap (8).

3.

Remove clip (4) from S-hook (9).

4.

Remove two S-hooks (6) and (9) from wire rope (7).

5.

Remove two swaging sleeves (10) from wire rope (7).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2836

Tools and Special Tools

Crimping Tool (WP 0398, Item 2)

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Lockwasher (1)

Lockwasher (1)

References

WP 0391, Fig. 65

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)