TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 287 of 844

TM 9-2320-328-13&P-3

0368-1

DRAFT

0368

FIELD LEVEL MAINTENANCE

WIRE HARNESS MOUNTING BRACKET REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

All wire harness brackets are removed the same way.

Driver side rear wire harness

bracket shown.

•

Remove cable ties as required.

•

All wire harness brackets are located along vehicle frame rails.

1.

Remove nut (1), lockwasher (2), screw (3), and cushion clip (4) from wire harness bracket (5).

Discard

lockwasher.

2.

Remove locknut (6), screw (7), and wire harness bracket (5) from frame rail (8).

Discard locknut.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2262

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (1)

Locknut (1)

References

WP 0391, Fig. 49, 50, 51, 52, 53, 54, 55, 56, 57,

58, 59

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)